Posted 07 Feb by

For supply of pallet wrapping machines Melbourne Packaging supplies has partnered with Altanta Stretch in Italy. More info on Atlanta stretch is below. Melbpack believes in been upfront an honest with customers, so we don’t rebrand our pallet wrapping machines. Any purchases of our pallet wrapping machines know they have the full backing of Melbourne Packaging Supplies and Atlanta Stretch.

Our supplier Atlanta stretch has post another article going into further details about the design and practically of their machines. this is a following on article from the previous post found here the official article from Atlanta stretch can be found here on the Atlanta stretch website. We elaborated previously on these points in our own words and what it means for Australian customers and buyers.

Click here for more information on our full range of pallet wrapping machines

The consistent theme that emerges from the articles we have written about our range of semi-automatic wrapping machines is their ability to completely negate the need for any manual wrapping operations.

Making the pallet wrapping phase almost completely automated allows us to reduce the chance of human error and as a direct consequence increase the overall productivity in relation to the total number of pallets wrapped.

Not only that, but there is also an important improvement in the quality of the wrapping.

These important milestones are made possible by the ergonomic design that is typical of our semi-automatic wrapping solutions.

The following aspects dramatically improve the practical, operator friendly nature of our machines: the low profile table, the F62 program, the F29 soft start cycle, the innovations introduced on the Sfera 2400 model and the structure of the EVA model.

In the course of this article we will analyse each of the elements listed and, only at the end, we will reveal “what’s cooking” at the next trade show where we will be exhibiting.

The ergonomics approach in our semi-automatic wrapping machines

In semi-automatic machines, the operator has the task of: positioning the pallet, connecting and attaching the stretch film to it, starting the wrapping cycle and cutting the film if there is no option that takes care of it automatically.

Once all these operations have been completed, it is the operator who then removes the pallet by placing it in the warehouse or loading it on the vehicle for transport to the customer.

Guaranteeing customers the highest possible level of ergonomics means allowing them to carry out all these operations in a simple and “comfortable” way, thus we are also protecting their health and safety of all employees.

Let’s see in detail the different ergonomic solutions designed for operators:

  • LOW PROFILE TABLE
    By reducing the height of the turntable from the ground to only 25mm requires less effort for the operator when loading the pallet; additionally, the footprint is also reduced compared to a classic ramp.
  • PROGRAM F62
    Thanks to this program, the operator will no longer need to bend to the ground to perform cutting, reel change or attaching film to the pallet as he can set a predefined height for the carriage at the end of the wrapping cycle.
  • SOFT START CYCLE F29
    The first round of wrapping takes place in a slowed down mode: this reduces cases of film tearing when the corners of the pallet are very sharp and avoids the operator having to repeat the film attachment operation several times; also the application of cardboard corners and / or labels is easier and faster.
  • MARATHON
    This semi-automatic wrapping machine model ensures that the operator no longer has to bear the weight of the film reel and make movements that will cause damage to their back with constant use.
    >>> Discover the Marathon model
  • SPHERE 2400
    We have revised the Sfera model by adding a new column for a wrapping height of 2400mm, a big step forward in terms of ergonomics as it is no longer necessary to assemble the column: the robot is shipped completely assembled.
    >>> Discover the Sfera 2400 model

The 6 strengths of ATLANTA STRETCH semi-automatic wrapping machines

Ergonomics is undoubtedly one of the factors that contributes to increasing the commercial value of our semi-automatic wrapping machines.

To this are added the 6 elements we mentioned in the article on the commercial strengths of our semi-automatic wrapping machines, let’s look at them in detail.
(The Melbpack article and elaboration can be found here

A SINGLE ELECTRONIC CARD FOR ALL MACHINE MODELS

We have chosen to mount a single electronic board on all semi-automatic wrapping machine models : in practice, the only difference will be the particular software necessary for each machine model .

Through remote interventions, our technicians take care of upgrading and updating the machine by activating new functions.

In this way we offer:

  • a higher level of assurance and reliability;
  • highly flexible solutions compared to our competitors;
  • Shorter delivery times and a reduction in the cost of spare parts.

USE OF COMMERCIAL COMPONENTS and INVERTERS

The choice to use components and commercial inverters for speed control in all machines favours greater flexibility in terms of supply of materials, lower costs of spare parts themselves and less warehouse costs for the reseller.

COMPETITIVELY PRICED SPARE PARTS

All the choices and aspects analysed up to this point introduce one of the main strengths of our commercial offer relating to spare parts.

Thanks to our high production flexibility, most of the spare parts are 40% cheaper than those offered by our competitors .

INTERCHANGEABLE CARRIAGES THAT “EVOLVE” WITH THE MACHINE

It is natural that our customers load requirements will evolve over time, especially in the case of young companies.

Much of the competition in the marketplace “forces” the customer to change the wrapping machine model: Atlanta Stretch is the only company able to change the reel carriage model after delivery.

Those who choose to purchase a semiautomatic wrapping machine model such as MYTHO or SFERA with an FM type carriage can request its replacement with one of the FE, PRS or PS type to meet emerging technical and economic needs.
The use of interchangeable film carriages allows you to obtain the maximum return on your investment.

In this regard, I recommend that you read the news dedicated to The MYTHO, the semiautomatic that grows with the company. you can find more info on the Mytho here on the melbpack website.

PRESS ROLLS IN ANTI-CUT POLYURETHANE

Compared to the competition, which mounts rubber-coated pre-stretch rollers on its machines, we have chosen to use anti-cut polyurethane solutions which are characterised by a lower after-sales cost and high performance.

Replacing the film reels is also very simple: The Mytho model, for example, is equipped with a film change system that is made even easier by opening the back of the carriage.

TP TABLE WITH CHOICE OF INPUT

Our mission has always been to design intelligent and safe solutions for operators, capable of guaranteeing high productivity and a low TCO (Total Cost of Ownership).

For this reason, Atlanta Stretch’s range of semi-automatic machines includes a series of wrapping machines equipped with a rotating table with an easily reversable load direction.

The transpallet turntable supports three different loading methods and, depending on the customer’s needs, it is quick and easy to apply any changes.

As with the film carriages this high level of flexibility means that unlike our competitors, there is no need to go through a costly and inconvenient process of buying a completely new machine, when the requirements of your business only change slightly.

Among the semi-automatic wrapping machines with rotating tables we The EVA, SYNTHESI, SYNTHEX, MYTHO AND MYTHO AUTO

ATLANTA STRETCH returns to the show: see you at Ipackima!

Semi-automatic wrapping machines will be the stars of the Atlanta Stretch stand at the Ipackima trade show which is due to be held in Milan from 3 to 6 May.

There we will present a revolutionary development in the world of semi-automatic machines that will completely change the way pallet wrappers are used.

At the moment we cannot reveal anymore information but we promise assure you that it will be something NEVER SEEN BEFORE and something you don’t want to miss !!
#staytuned😜

______
That does it with Todays article form Atlanta stretch, we cant wait to see whats in store at ipackima but we know it will be BIG. Atlanta stretch have just purchased a new production facility and are spinning up production soon on a new line.

Atlanta Stretch SpA are specialists in the design, construction and manufacturing of automatic and semi-automatic pallet stretch wrapping machines. This includes integrating machines into complex production lines, specially developed to automate the complete packaging process.

Atlanta Stretch was founded by Mr. Angelo Forni in 2005. He was also the founding father of various other important packaging companies during the 1980’s, all of which still exist in the market today.

Atlanta Stretch SpA has a range of patented systems, which are contributing to more advanced and economically sound solutions, all without compromising on quality or technical performance. The innovations we have introduced allow Altanta’s stretch wrapping machines to be installed even more easily and therefore in less time. Atlanta Stretch have also designed them to take up less space, consequently they deliver reduced costs of installation and integration. All this adds to our ability to provide excellent value for money in the the overall costs of packaging in general.

Atlanta Stretch SpA is now operating from the new headquarters at Santarcangelo di Romagna, near the motorway A14 exit Rimini Nord.

During the last 10 years  Atlanta Stretch achieved an average growth of 20% per year. Atlanta’s stretch film wrapping machines are in high demand, for that reason we have built a new industrial site covering over 11.000 square meters. Our economic forecast shows that Atlanta Stretch SpA will soon become the biggest manufacturer of pallet wrapping systems in Europe.

Because Atlanta focus on safety, innovation, energy and expertise, our stretch wrapping machines are extremely reliable, placing Atlanta Stretch SpA in a market leading position. Atlanta feel confident in being able to meet the challenges of the future as we have a collective determination combined with people who believe in their work and trust in each other to provide complete satisfaction for our customers.

For more information on Atlanta Stretch visit: their website.

Atlanta Stretch is part of a large network of companies:


ATLANTA SpA is a specialised company engaged in the production of packaging machines for food, beverage, pet food, detergents, lubricants and personal care products. At ATLANTA SpA always take into account your specific needs concerning productivity, innovation and competitiveness. ATLANTA SpA take pride in offering machines with simplified user operation and design solutions that best suit production and management requirements. The customer is ATLANTA SpA’s constant focus and we concentrate on getting the solution right for each individual company. Through ease of use, our machines enable increased versatility and therefore increased productivity. This is delivered through our ability to wrap a very wide range of products and vary the programmes according to specific needs.

Visit their website: http://www.atlantapackaging.eu

LP Packaging Srl  is a specialised company engaged in the production of packaging machines for food, beverage, pet food, detergents, lubricants and personal care products. This company meets the requirements, which are beyond the scope of our partner ATLANTA SpA.

LP Packaging Srl  has been designing and manufacturing automatic packaging & wrapping machines since 1985, gaining a extensive experience over that time. We focus on catering for the individual requirements of all customers and we offer clever solutions for their products, either new or existing, large or small, heavy or light. We use our considerable experience and know-how within many industries including Food, Cosmetics, Pharmaceutical and, of course, the world-wide manufacture of non-food products.

Please explore and ask for turnkey solutions from LP packaging machines. Our team is ready to assist and provide professional support to all our customers, satisfying their requests and needs with the best service available.

Visit our website: www.lp-packaging.it

COMARME Srl is the worldwide leading producer and distributor of case sealers using adhesive tape, gummed tape and hot melt glue.  The Company was established at the beginning of the 1900s. During the 1960’s its core business became the production of our case sealers range. The name “sealer” originates from the concept of sealing cartons with adhesive tape. This type of machine was pioneered and developed by Comarme through its passion and commitment to design the best packaging machines. 5 Years ago COMARME was purchased by the ATLANTA group of companies.

Visit our website: www.comarmesrl.com

The Atlanta group of companies:

  • Provides a wide range of durable equipment to meet your industry needs.
  • The Atlanta group has the individual model best suited to you.
  • The Atlanta group have manufactured and installed thousands of wrapping lines all across the world.
  • Satisfied the bespoke requirements of more than 15,000 customers.
  • From each and every business sector.

You can see why Melbourne Packaging Supplies have partnered with Atlanta Stretch, Melbourne Packaging have been a trusted supplier for over 40 years and well respected in the industry for our quality and service and have chosen a manufacturer carefully who aligns with our values.