#SI36 HIGH TACK POLYETHYLENE SURFACE PROTECTION FILM
#SI36 HIGH TACK POLYETHYLENE SURFACE PROTECTION FILM
Product information:
HIGH TACK POLYETHYLENE SURFACE PROTECTION FILM
Product Features:
- Orange Film
- Acrylic emulsion adhesive
- Coated with solvent free pressure sensitive acrylic resin adhesive
Applications:
- Surface protection of “low energy” and textured surfaces.
- Particularly suited for plastic, glass, vinyl and veneers
- Recommend for applications where a narrow width may be required
- Suitable for “Mask & Peel” applications within the furniture and joinery industry
g.: kitchen benchtops, doors. - Suitable for temporary outdoor masking of guttering, downpipes, balustrades etc. During rendering work.
Technical data:
Tape Thickness | 0.05MM |
Breaking Load | 12 N/CM |
Elongation at Break | 350% |
Adhesion to Steel | 1.75 N/CM |
Service Temperature | -40 to 50 deg C |
Storage Temperature | 15 to 25 deg C |
Shelf Life | 12 Months |
Surface Preparation:
The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15 and 25 deg C.
Storage:
Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Sizing Options:
Code | Description |
GGSI36 | SI36 1220MM X 100M X 50UM ORANGE HIGH TAC |
GGSI36L | SI36 1530MM X 100M X 50UM ORANGE HIGH TAC |
*Roll size can be slit from 24mm to 1530mm in 100 metre lengths