HIGH TACK POLYETHYLENE SURFACE PROTECTION FILM

SKU: GGSI36 Category:

Product information: 
HIGH TACK POLYETHYLENE SURFACE PROTECTION FILM

Product Features:

  • Orange Film
  • Acrylic emulsion adhesive
  • Coated with solvent free pressure sensitive acrylic resin adhesive

Applications:

  • Surface protection of “low energy” and textured surfaces.
  • Particularly suited for plastic, glass, vinyl and veneers
  • Recommend for applications where a narrow width may be required
  • Suitable for “Mask & Peel” applications within the furniture and joinery industry
    g.: kitchen benchtops, doors.
  • Suitable for temporary outdoor masking of guttering, downpipes, balustrades etc. During rendering work.

Technical data:

Tape Thickness 0.05MM
Breaking Load 12 N/CM
Elongation at Break 350%
Adhesion to Steel 1.75 N/CM
Service Temperature -40 to 50 deg C
Storage Temperature 15 to 25 deg C
Shelf Life 12 Months

Surface Preparation:  
The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15 and 25 deg C.

Storage:
Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Sizing Options:

 

Code Description
GGSI36 SI36 1220MM X 100M X 50UM ORANGE HIGH TAC
GGSI36L SI36 1530MM X 100M X 50UM ORANGE HIGH TAC

*Roll size can be slit from 24mm to 1530mm in 100 metre lengths