Sfera easy arm wrapping robot

pallet wrapping robot for wrapping unstable or large pallets.

SKU: Sfera Category:

The sfera easy is a unique pallet wrapping robot, using the 2400mm wrapping height arm is capable of wrapping any pallet a turntable machine can. This pallet wrapper can wrap large pallets.

Advantages

  • mobile, wrap anywhere
  • Wrap unlimited weight
  • Wrap unlimited size.
  • Great for unstable loads
  • low height arm, increase stability and easier to store.

The Sfera we by default equip with the PRS system, an advanced system capable of stretching 1m of wrap out to 3m. giving users excellent savings on film usage.

Watch below

(Auto cut shown above, option)

 

All function parameters settable on display

F00 – Key block
F02 – Rotation speed adjustable from 5 to 12 rpm
Spool carriage speed upwards and downwards independently adjustable
F03 – Spool carriage speed upwards speed from 1,3 up to 5,4 m/min
F04 – Spool carriage speed downwards speed from 1,3 up to 5,4 m/min
F05 – Bottom pallet wrapping rounds from 1 to 10
F06 – Top pallet wrapping rounds from 1 to 10
F09 – Photocell sensing delay
F13 – F16 – Set Film tension at four steps during the wrapping programm
F17 – F20 – With PS Carriage, set Film pre-stretch at four steps during the wrapping programm
F62 – Comfort height for easy coil change
Weight of film used (Option on PRS – PS)

BASIC CYCLES SELECTABLE FROM CONTROL PANEL
6 Wrapping programs created by the operator for the SFERA EASY
F01 – 1 – Double cycle (Upwards/Downwards)
F01 – 2 – Single cycle (Only upwards or only downwards)
F10 – F11 – Wrapping cycle with start and stop height pre-programmed
F12 – Wrapping cycle with altimeter (Photocell Off)
F21 – Wrapping cycle for pallets with large dimensions
F22 / F23 – Top sheet cycle
F29 – Softstart cycle to apply manually corner protectors
F30 – F31 – Wrapping cycle with reinforcement and settable number of wraps
Softstart cycle to reduce film tear on sharp pallet angles

FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH)
Film pre-stretch ratio set to 200%
Film tension on load electronically controlled from control board
Easy and Quick film loading system with safe and enclosed carriage

 

Technical Info

SFERA EASYOperating panel 11″ TOUCH with 6+1 Programs
Min pallet dimension600 x 600 mm
Max pallet dimensionPallet size can be programmed on the operating panel
Adjustable speed facilitated by frequency changerMax 65 m/min
Carriage braking system200% prestretch
Standard wrapping height2400 mm Melbpack standard is 2400mm
Optional wrapping height 2400 mm Melbpack standard is 2400mm
Photocell detection of load heightSTANDARD SUPPLY
Adjustable Spool carriage speed facilitated by inverterFrom 1,3 up to 5,4 m/min
Upwards Spool carriage speedIndependently settable
Downwards Spool carriage speedIndependently settable
Lifting with fork lift truckSTANDARD SUPPLY
Total installed power0,55 Kw
High frequency built-in battery charger230 V – 50/60 Hz
Standard charging voltage230 V – 50/60 Hz – 1 Ph
Operating voltage24 V
Electrical and motor protection systemIP 20
Output capacity35 Pallets per Hour **