Stainless Steel pallet wrapper- Mytho INOX

SKU: XF-5003-INOX Category:

The Mytho is a flexible pallet wrapping platform cable of many upgrades and option, the Mytho INOX (stainless steel) is a robust machine made for, wet, cold and out door environments.

The Mytho INOX features full stainless steel frame, panel and turntable upgrades. with upgrades to silicone wires and control board protections.

Suitable for:

  • Food industries, wet enviroment
  • Food industry, freezer
  • Longterm outside use.


Feature Summery.

  • Automatic 1 Button Push start
  • Available in 4 different carriage options, see below.
  • Automatic pallet Height detection
  • 6 Fully adjustable Auto programs, Plus manual mode of operation.
  • Over 30 adjustable parameters, see below for complete list.
  • 2000kg Capacity
  • 2500mm Wrapping height
  • 1650mm diameter turntable for Australian and export pallets.
  • Made in Italy by Atlanta Stretch.
  • Built with German Schneider electric inverters

Save a massive amount per pallet by using the Mytho PRS.

Watch as we wrap this pallet using 99g of stretchwrap.


  • Bottom pallet wrapping rounds from 1 to 10
  • Top pallet wrapping rounds from 1 to 10
  • Rotation speed adjustable from 5 to 12 rpm
  • Spool carriage speed upwards and downwards independently adjustable
  • Spool carriage speed upwards speed from 1,3 up to 5,4 m/min
  • Spool carriage speed downwards speed from 1,3 up to 5,4 m/min
  • All function parameters settable on display
  • Photocell sensing delay
  • All function parameters settable on display
  • Weight of film used (Option on PRS – PS)
  • Key block


  • Double cycle (Upwards / Downwards)
  • Single cycle (Only upwards or only downwards)
  • Top sheet cycle
  • Wrapping cycle with altimeter (Photocell Off)
  • Wrapping cycle with start and stop height pre-programmed
  • Wrapping cycle with reinforcement and settable number of wraps
  • Wrapping cycle with step rising of spool carriage
  • Manual wrapping programme
  •  Push-buttons for manual functions



  • Turntable Ø 1650 mm
  • Max. load weight: 2000 Kg
  • Wrapping height (Pallet included) 2500 mm
  • Base-frame turntable height 75mm
  • Load height sensing photocell and altimeter
  • Acceleration / Deceleration ramps controlled by frequency changer
  • Spool carriage upwards/downwards speeds controlled by frequency changer
  •  Safety carriage foot protection
  •  Beeper at cycle start and phase stopping at cycle end
  • Emergency mushroom & reset push-button according to latest CE Norms
  • Safe enclosed mast design with chain drive.


Total installed power0,75 KW – 1,00 KW (with carriage PRS / PS)
Standard input voltage230V mono-phase – 50/60 Hhz 10AMP
OutletAU standard plug



The Mytho can be equipped with multiple carriages and if so required upgraded at a later time to another carriage, it can grow with your business. we reccomnd the use of the PRS carraige for medium to high volume users, to achieve maximum saving on wrapping.

FM – Mechanical Brake. XF-5001
Standard entry level brake capable of stretching film 0-100% (1x-2x Yield)

FE – Electromagnetic Brake XF-5002
Heavy Duty brake capable of stretching film 0-100% (1x-2x Yield)

Main Model: PRS – Power Roller Stretch – XF-5003
Capable of stretching wrap to predefined rations, 150%, 200% and 250% giving users excellent wrapping efficiency. (x2.5 – 3.5 yield)

Prestretch system System with cover removed:


PS – Power stretch XF-5004
Twin motor power stretch unit electronically adjustable ratio’s from 120%-350% (x2.2 – x45 yield)





Where and who by is this machine built?
The Mytho is built in Italy by Atlanta Stretch, Watch a video below of it being built.

Do i need any special power requirements to run this Machine?
No this will fit into any standard 230/240v AU plug. 10Amp Plug.

Can i run this Machine in Manual mode as i have irregular pallets?
Yes you can, the Mytho has a manual mode of operation where you can manually turn the turntable by the interface and control the carriage height manually through the interface.

What is a PPS unit?
A PPS unit is a powered prestretch machine, this is the carriage where the film sits and is dispensers from the PPS unit stretches the wrap from 1m to over 3m giving users a high stretchwrap yield. The PPS system on the Mytho is refereed to a PRS for single motor or PS for twin motor variable system.

Is it easy to load the film?
The PRS carriage is very easy to load, the film just needs to sit on the holder, you open the door of the machine, grab the film and place it through the door and close it.

Am i going to get confused by all the buttons?
 At first look the panel might look overwhelming, but its simple to use once you have the hang of it, it doesn’t  requiring going into to second or tertiary menus or sub menus like pretty much every other machine, all functions are directly accessible from the machine screen. We will assist in training of the machine.


Top press option video: